VisionLINE Air Flue System
Read MoreVisionLINE Air Flue System
Designed in Europe for high efficiency homes, the VisionLINE air flue is crafted with the highest quality materials and packed with state of the art technology, enhancing your fire while maintaining indoor air quality and efficiency.
VisionLINE Air Flue Approval number to AS/NZS 2918 2018 Appendix F is ASFT20032 Issued on 3rd April 2020
The Visionline air flue system is a co-axial, room sealed insulated flue system for freestanding solid fuel slow combustion heaters. It is designed to increase the performance of slow combustion heaters and increase the efficiency in the home when compared to a typical air cooled default flue.
For in the room;
The stove pipe inner section is made from double walled seam welded 316 stainless steel re-inforced by .5mm carbon steel with a powder coated and seam welded 304 outer casing.
This triple skin Stove pipe promotes a better draft and lower outside temperatures than typical solid twin skin systems with less extreme heat spots and discolouring.
It also features a clean line 80mm ceiling ring that is installed flush with your ceiling plaster with matching powder coat, what you see in the home is all class and high quality. This room sealed stove pipe and ceiling ring combination means the heat being generated from your fire isn't being lost through the flue system to keep it cool.
The stove pipe has 3 main sizes available including a slip piece to get the connection just right for every installation.
For fireplaces that have an outside air intake the visionline air flue connects to it via a T-section and adjustable snorkel. If your fireplace has a co-axial outside air connection, the Visionline Air flue stove pipe plugs straight in.
For above the ceiling;
The safety vent sections of flue feature a double walled active flue which is protected by 2 layers of insulation, an air gap and then a further outer wall for the optimum in fireplace safety.
All safety vent sections feature a tough twist locking mechanism that compresses each join to create a strong lock and super tight seal further promoting good draft.
After the ceiling penetration there's 2 roof brace supports that are installed within the ceiling cavity to take the weight of the flue. This enables the flue outside the roof cavity to installed with no additional bracing for up to 3 metres.
For above the Roof;
The cowl is constructed from full 316 stainless steel and is powder coated for the ultimate in protection. The cap has a full brim designed to reduce water intrusion from rain or condensation and the underside cowl cover has an extended wind skirt shield to reduce turbulence to the air intake. This innovation has been known to fix the symptom of a whistling dropbox in air cooled default flue systems during high velocity wind.
There is also an added mesh layer to limit unwanted bird access together with a protective wind rim to reduce the effects of downdraft to the fire.
Approval standards
The Visionline air insulated flue system has been tested to AS/NZS 2918 2018 appendix F and is considered default. This means it can be installed on any slow combustion heater that is approved for sale within Australia. It is also the only insulated flue system in the Australian with CE-EN-NO 1856 certification which covers tensile strength, compressive strength testing, Wind Load testing, Aerodynamic performance of termination under wind tunnel and gas tightness from unit to termination.
Visionline Safety Vent Air Flue Brochure
Install Flue Walkthrough
Wind Noise Problem Solved
Air balance problem solved
The Exceptional Insulated Flue Kit in Australia
Our insulated flue kit is no ordinary product. VisionLINE’s Air Flue system enhances your fireplace while maintaining indoor air quality and system efficiency.
The Air Flue system is a co-axial, room sealed insulated flue system for freestanding solid fuel slow combustion heaters. The room-sealed stove pipe and ceiling ring combination ensure that heat generated from your fire isn’t lost through the flue system.
The VisionLine air flue kit connects to fireplaces with an outside air intake via a T-section and adjustable snorkel. The safety vent sections of the flue possess a double-walled active flue, protected by two layers of insulation—an air gap and an outer wall. This creates a lock and tight seal for an excellent draft.
Insulated Room Sealed Flue – A Smart Solution
Our insulated room sealed flue increases the performance of slow combustion heaters, boosting efficiency in your home when compared to a typical air-cooled default flue.
The room-sealed feature means the heat coming from your fire isn’t lost through the flue system to keep it cool. It is constructed from double-walled seam welded 316 stainless steel and reinforced by 0.5mm carbon steel, assuring durability and high performance.
There’s also a clean line 80mm ceiling ring that is installed flush with your ceiling plaster, creating a sleek and high-quality look for your home.
It can be installed on any slow combustion heater approved for sale within Australia, an excellent choice for properties in Sydney, Brisbane, and Adelaide.
Insulated Flue Pipe for Melbourne Homes
Our insulated flue pipe promotes better draft and lower outside temperatures than typical solid twin skin systems, making it a suitable solution for homeowners wanting to feel warmer in winter.
The insulated flue pipes embrace innovative technology with durability, ensuring optimal performance throughout their lifetime. They are innovatively designed to be safe, improving air circulation and smoke expulsion, so you can add warmth to your home without compromising air quality.
Why Choose VisionLINE’s Insulated Flue Kit?
Our insulated flue kits are not just practical but offer many advantages to homeowners across Australia:
- Safety: We take safety seriously. Our products comply with the Australian standard AS/NZS 2918 2018, giving you peace of mind when you equip your home with VisionLINE’s flue kits.
- Optimal Performance: Using our flue kits, you can improve the performance of your heaters and manage energy usage efficiently.
- Durability: Our flue kits are designed to last, featuring high-quality materials and construction and providing long-term value.
- Aesthetics: We make sure your flue systems blend into any home decor and add a touch of elegance to your interiors.
- Versatility: Our products can be installed on any slow combustion heater approved within Australia.
For more information about the VisionLINE air insulated flue system or any of our other products, get in touch with us on 1300 219 875 or browse our extensive range online today. As the leading name in fireplaces and flue systems, we’re here to enhance your home’s atmosphere and keep you cosy no matter the season.
Frequently Asked Questions for Insulated Flue Kit in Australia
VisionLINE’s Insulated Flue Kit is crafted with high-quality materials and state-of-the-art technology. It enhances your fireplace, maintains indoor air quality and system efficiency, which makes it an excellent solution for homeowners looking for a safe and energy-efficient system.
The insulated room sealed flue is designed to enhance the performance of slow combustion heaters, boosting efficiency compared to a typical air-cooled default flue. The heat generated from your fire isn’t lost through the flue system, helping to keep it cool.
Yes, the Insulated Room Sealed Flue can be installed on any slow combustion heater approved for sale within Australia. Hence, it is an excellent choice for properties in Sydney, Brisbane and Adelaide.
The Insulated Flue Pipe from VisionLINE is designed to promote better draft and lower outside temperatures than typical solid twin skin systems, making it a suitable solution for homeowners in Melbourne and across Australia.
The Insulated Flue Kits from VisionLINE are safe, compliant with the Australian standards, optimally performing, durable, aesthetically pleasing, and versatile which makes them the best choice for every Australian home.
Need to ask us something?
Complete the contact form below and we will get back to you as soon as we can. Alternatively, call us during our business hours, or visit on of our VisionLINE distributors.